--- layout: default title: Tracing and Profiling parent: Tools nav_order: 2 --- # Tracing and Profiling {: .no_toc } 1. TOC {:toc} --- The MediaPipe framework includes a built-in tracer and profiler. The tracer records various timing events related to packet processing, including the start and end time of each Calculator::Process call. The tracer writes trace log files in binary protobuf format. The profiler further accumulates for each running calculator a histogram of latencies for Process calls. Tracing and profiling is available on Linux, Android, or iOS. ## Enabling tracing and profiling To enable tracing and profiling of a mediapipe graph: 1. The profiling library must be linked to the framework. 2. Tracing and profiling must be enabled in the graph configuration. The profiling library is linked to the framework by default. If needed, the profiling library can be omitted from the framework using the bazel command line option: `--define MEDIAPIPE_PROFILING=0`. To enable tracing and profiling, the `CalculatorGraphConfig` (in [calculator.proto](https://github.com/google/mediapipe/tree/master/mediapipe/framework/calculator.proto)) representing the graph must have a `profiler_config` message at its root. Here is a simple setup that turns on tracing and keeps 100 seconds of timing events: ``` profiler_config { trace_enabled: true trace_log_interval_count: 200 } ``` * `enable_profiler` is required to emit any logging at all. * `trace_enabled` gives us packet level information needed for offline profiling. * `trace_log_count` is a convenience that allows us to, by default, to chop up our log into five separate files which are filled up in a round robin fashion (after the fifth file is recorded, the first file is used again). The trace log files are named `trace_0.log` through `trace_k.log`. See [Profiler configuration](#profiler_configuration) for other settings available in the profiler config. Note that most of the other settings are considered advanced, and in general should not be needed. ## Collecting the Logs MediaPipe will emit data into a pre-specified directory: * On the desktop, this will be the `/tmp` directory. * On Android, this will be the `/sdcard` directory. * On iOS, this can be reached through XCode. Select "Window/Devices and Simulators" and select the "Devices" tab. ![Windows Select Devices](../images/visualizer/ios_window_devices.png) You can open the Download Container. Logs will be located in `application container/.xcappdata/AppData/Documents/` ![Windows Download Container](../images/visualizer/ios_download_container.png) Log files are written to `\.binarypb` where, by default, `\` is equal to `mediapipe_trace_` (the entire path and file prefix can be overwritten by setting `trace_log_path` within the `profiler_config` message). The index will, by default, alternate between 0 and 1, unless you've overridden the trace_log_count as we did, above. By default, each file records five seconds of events. (Advanced: Specifically, we record ten intervals of half a second each. This can be overridden by adding `trace_log_interval_usec` and `trace_log_interval_count` to `profiler_config`). ### Tracing on Linux 1. Follow the instructions stated above in `Enable tracing` 2. Build and run your MediaPipe graph. The running graph writes trace events as stated above in `Collect the logs` ### Tracing on Android * Ensure that the Android app has write permissions to external storage. * Include the line below in your `AndroidManifest.xml` file. ```xml ``` * Grant the permission either upon first app launch, or by going into `Settings -> Apps & notifications -> $YOUR_APP -> Permissions` and enable `Storage`. * Add the following protobuf message into the existing calculator-graph-config protobuf, such as the existing `.pbtxt` file. Follow the instructions stated above in `Enable tracing` * Connect your Android device and run `adb devices`. ```bash adb devices # should print: # List of devices attached # 805KPWQ1876505 device ``` * Use `bazel build` to compile the Android app and use `adb install` to get it installed on your Android device. * Open the installed Android app. The running MediaPipe graph appends trace events to a trace log files at: ```bash /sdcard/mediapipe_trace_0.binarypb /sdcard/mediapipe_trace_1.binarypb ``` After every 5 sec, writing shifts to a successive trace log file, such that the most recent 5 sec of events are preserved. You can check whether the trace files have been written to the device using adb shell. ```bash adb shell "ls -la /sdcard/" ``` On android, MediaPipe selects the external storage directory `/sdcard` for trace logs. This directory can be overridden using the setting `trace_log_path`, like: ```bash profiler_config { trace_enabled: true trace_log_path: "/sdcard/profiles/" } ``` Note: The forward slash at the end of the `trace_log_path` is necessary for indicating that `profiles` is a directory (that *should* exist). * Download the trace files from the device. ```bash # from your terminal adb pull /sdcard/mediapipe_trace_0.binarypb # if successful you should see something like # /sdcard/mediapipe_trace_0.binarypb: 1 file pulled. 0.1 MB/s (6766 bytes in 0.045s) ``` ## Analyzing the Logs Trace logs can be analyzed from within the visualizer. 1. Navigate to [viz.mediapipe.dev](https://viz.mediapipe.dev) 2. Click on the "Upload" button in the upper right. ![Click on Upload](../images/visualizer/viz_click_upload.png) 3. Click on "Upload trace file". ![Click on Upload](../images/visualizer/viz_click_upload_trace_file.png) A sample trace file has been generated for you: [sample_trace_binary.pb](../data/visualizer/sample_trace.binarypb) 4. A file selection popup will appear. Select the `.binarypb` that holds your trace information. 5. A chart view will appear. All of your calculators will appear along the left with profiling information listed along the top. ![Click on Upload](../images/visualizer/viz_chart_view.png) Click on a header to alternately sort that column in ascending or descending order. You can also scroll horizontally and vertically within the control to see more columns and more calculators. ### Explanation of columns: name : The name of the calculator. fps : The number of frames that this calculator can generate each second, on average. `1 / (input_latency_mean + time_mean`) (Units are 1 / second). frequency : The rate that this calculator was asked to process packets per second. (Computed by `# of calls total / (last_call_time - first_call_time))`. (Units are `1 / second`) counter : Number of times process() was called on the calculator. It is the `sum of dropped + completed`. dropped : Number of times the calculator was called but did not produce an output. completed : Number of times that this calculator was asked to process inputs after which it generated outputs. processing_rate : `1E+6 / time_mean`. The number of times per second this calculator could run process, on average. (Units are `1 / second`). thread_count : The number of threads that made use of each calculator. time_mean : Average time spent within a calculator (in microseconds). time_stddev : Standard deviation of time_mean (in microseconds). time_total : Total time spent within a calculator (in microseconds). time_percent : Percent of total time spent within a calculator. input_latency_mean : Average latency between earliest input packet used by a iteration of the calculator and when the calculator actually begins processing (in microseconds). input_latency_stddev : Standard deviation of input_latency_mean (in microseconds). input_latency_total : Total accumulated input_latency (in microseconds). ## Profiler configuration Many of the following settings are advanced and not recommended for general usage. Consult [Enabling tracing and profiling](#enabling-tracing-and-profiling) for a friendlier introduction. histogram_interval_size_usec :Specifies the size of the runtimes histogram intervals (in microseconds) to generate the histogram of the Process() time. The last interval extends to +inf. If not specified, the interval is 1000000 usec = 1 sec. num_histogram_intervals :Specifies the number of intervals to generate the histogram of the `Process()` runtime. If not specified, one interval is used. enable_profiler : If true, the profiler starts profiling when graph is initialized. enable_stream_latency : If true, the profiler also profiles the stream latency and input-output latency. No-op if enable_profiler is false. use_packet_timestamp_for_added_packet : If true, the profiler uses packet timestamp (as production time and source production time) for packets added by calling `CalculatorGraph::AddPacketToInputStream()`. If false, uses the profiler's clock. trace_log_capacity : The maximum number of trace events buffered in memory. The default value buffers up to 20000 events. trace_event_types_disabled : Trace event types that are not logged. trace_log_path : The output directory and base-name prefix for trace log files. Log files are written to: StrCat(trace_log_path, index, "`.binarypb`") trace_log_count : The number of trace log files retained. The trace log files are named "`trace_0.log`" through "`trace_k.log`". The default value specifies 2 output files retained. trace_log_interval_usec : The interval in microseconds between trace log output. The default value specifies trace log output once every 0.5 sec. trace_log_margin_usec : The interval in microseconds between TimeNow and the highest times included in trace log output. This margin allows time for events to be appended to the TraceBuffer. trace_log_instant_events : False specifies an event for each calculator invocation. True specifies a separate event for each start and finish time. trace_log_interval_count : The number of trace log intervals per file. The total log duration is: `trace_log_interval_usec * trace_log_file_count * trace_log_interval_count`. The default value specifies 10 intervals per file. trace_log_disabled : An option to turn ON/OFF writing trace files to disk. Saving trace files to disk is enabled by default. trace_enabled : If true, tracer timing events are recorded and reported.